Sonicsmith MIDVertor E1
Modular Interface
EUR 318.10
Incl. VAT, free shipping in Germany
Product # | 227942 |
Brand | Sonicsmith |
Category | Modular Interfaces | Brand Category | Sonicsmith - Interfaces |
Release date | March 2021 |
Availability | Will be ordered for you as quick as possible |
Description
This 6HP Module can digitally translate data between a ConVertor E1’s pitch, ENV, gate, and can enhance the performance of a single ConVertor E1 by adding a sustain pedal to freeze pitch & ENV or an expression pedal for harmony shift or other parameters remote preset switchings, synced arpeggio, updating firmware from USB connection and more.
After connecting the 4-pin header connection, the MIDVertor auto-detects which device is connected to either of its 6 "Sonicsmith bus" connections. Immediately offering MIDI output from the audio input of the ConVertor. Arpeggiation to any connected ConVertor E1 is also available and will be arpeggiate the MIDI out as well as arpeggiate the ConVertor E1 SYNTH outputs. When more than 1 ConVertor E1 is connected at one time, the user can split the ConVertor E1's into groups that will unify their operation regarding preset switching, sustain/expression pedal modulation, arpeggio and more. More E1 series modules maybe coming in near future for shared presets/routing.
The MIDVertor is an open source code device that invites DIY programmers to tailor a custom Firmware if more or fewer features are desired. Also its device mini USB connection can help with preset management and firmware updates remotely to one or more ConVertor E1's at once saving time with polyphonic group updates.
After connecting the 4-pin header connection, the MIDVertor auto-detects which device is connected to either of its 6 "Sonicsmith bus" connections. Immediately offering MIDI output from the audio input of the ConVertor. Arpeggiation to any connected ConVertor E1 is also available and will be arpeggiate the MIDI out as well as arpeggiate the ConVertor E1 SYNTH outputs. When more than 1 ConVertor E1 is connected at one time, the user can split the ConVertor E1's into groups that will unify their operation regarding preset switching, sustain/expression pedal modulation, arpeggio and more. More E1 series modules maybe coming in near future for shared presets/routing.
The MIDVertor is an open source code device that invites DIY programmers to tailor a custom Firmware if more or fewer features are desired. Also its device mini USB connection can help with preset management and firmware updates remotely to one or more ConVertor E1's at once saving time with polyphonic group updates.
Attributes
Key attributes
| ||||||||||||
Module Specifications
| ||||||||||||
Power Consumption InformationMost Eurorack modules tend to only require the dual 12V rails (positive/negative), but some modules may need some amount of +5V current to function.
| ||||||||||||
Product Details
|
Properties
Perfectly reflecting the ConVertor E1’s audio input via MIDI control out to digital synths monophonically or parallel poly-group
MIDI behavior tweaking incl. MIDI channel out, pitch-bend range, velocity response, and ENV output via CC or after-touch commands
Sonicsmith bus can remotely update firmware and switch presets to any connected ConVertor E1’s
Open-source firmware, DIY make your own firmware or tweak existing features
Fastest, most accurate, audio-to-MIDI translator to date with 16-bit pitch word that is MIDI 2.0 ready
Sustain pedal input that will be reflected in the MIDI out and back to a ConVertor for pitch freeze
Arpeggiator can arpeggiate any ConVertor synth engine and MIDI outputs with preset MIDI patterns
Digital 4-pin connection to a ConVertor E1 to enable MIDI in/out, sustain pedal, arpeggiation, and sync expansion option
Extremely high speed micro-controller can accept up to 7 Sonicsmith bus in parallel
MIDI behavior tweaking incl. MIDI channel out, pitch-bend range, velocity response, and ENV output via CC or after-touch commands
Sonicsmith bus can remotely update firmware and switch presets to any connected ConVertor E1’s
Open-source firmware, DIY make your own firmware or tweak existing features
Fastest, most accurate, audio-to-MIDI translator to date with 16-bit pitch word that is MIDI 2.0 ready
Sustain pedal input that will be reflected in the MIDI out and back to a ConVertor for pitch freeze
Arpeggiator can arpeggiate any ConVertor synth engine and MIDI outputs with preset MIDI patterns
Digital 4-pin connection to a ConVertor E1 to enable MIDI in/out, sustain pedal, arpeggiation, and sync expansion option
Extremely high speed micro-controller can accept up to 7 Sonicsmith bus in parallel
Report incorrect data about this product